13.56 MHz t.BARman RF/ID Data Collection Reader from Axiome and ID America

Data Collection

13.56 MHz t.BARman:

A discreet and reliable information aid:

RFID TAGS are microcircuits with memory that can be both read and written using radio-frequency. Their small size allows them to be integrated into a variety of physical objects.

Mobility and security:

t.BARman opens the way to unlimited applications where mobility is essential, such as product identification, product flow management, maintenance...generally speaking, wherever recording and tracking is required.

See...You can't even see it!

The t.BARman breaks new ground by offering radio frequency identification of tags. t.BARman is not only a highly mobile and resistant terminal, it's also a complete system with a whole network of interfaces and all the programming and communication software of the BARman range. Features such as automatic communication, magnetic connection to interface, direct data capture or keyboard entry, integrated clock, and customized programming are packed into this pocket-sized unit.

This new terminal (model BTS) is:

based on the BARman Laser architecture, using the same main board and casing.

equipped with an integrated 13.56 MHz reading/writing head supporting the RFID Smart Labels, Tag-it by Texas Instruments, and i.Code by Philips (further decoders will be added in the near future).

available in 512 KB and 1MB versions (models BTS 512 and BTS 1024).

programmable in AXEL (V 3.x, present version). Runs on AXEL OS version 2.0 (new firmware for this terminal).

Specifications:

Electronics

Micro-controller: 8 bit CMOS, 8KB bootstrap loader EPROM
Program memory: 65 KB flash memory
Data RAM: 512 KB or 1MB SRAM
Power Supply: 4NiCad 200 mAh, rechargeable
Autonomy: approx. 12 hours, when reading every 20 seconds
Progarmming: AXEL complier (BASIC like) or C

Physical

Technology: SMT
Dimensions: LxWxH = 6.57 x 2.2 x 1.5 in.
Weight: 6.7 oz with batteries
Buzzer: piezoelectric, programmable in frequency and duration
LED: programmable red/green
Display: high contrast LCD 4 x 16 characters plus icons, back-lit
Calendar/Clock: quartz RTC, date and time
Keyboard: 25 silicone rubber keys

Environment

Operating temperature: -4º x 122º F
Storage temperature: -4º x 122º F
Relative humidity: 95% non-condensing
Protection standard: IP65
Electrostatic charges: IEC 801-2 (up to 15kV)
Tumble resistance: from 3.3 feet onto concrete

RFID Head

Integrated RFID Head (13.56 MHz)
Supports industry standard 13.56 MHz read/write tags and smart labels
Based on Multi-Standard Reader architechture which provides simultaneous and transparent support for tags and smart lables by different vendors
Proximity reader (up to 55mm read range)
Supports high frequency tags and smart lables by Philips Semiconductors (I.CODE - a read/write RFID tag with 512 bits storage capacity. Data is addressed sixteen blocks of 32 bits. t.BARman can read I.CODE tags up to 5 mm and write I.CODE tags up to 50mm, depending on tag antenna.)
Supports high frequncy tags and smart labels by Texas Instruments (Tag-It - a read/write RFID tag with 256 bits storage capacity. Data is addressed in eight blocks of 32 bits. A non-user programmable block of 64 bits exists for storing tag information. t.BARman can read Tag-It tags up to 50 mm and write Tag-It tags up to 40mm, depending on tag antenna.)

Please call toll free at 1-800-899-0963 or fill out this form to inquire about any of our products.