Magnetic Badge Holder Information
Millions of our exclusive Magnetic ID Holders have been sold to people who
prefer not to use a clip or pin on their clothing.
These
custom features are available:
- Imprinting.
- Choice of regular or shielded magnets.
- Made in America to last from top
quality virgin vinyl with two permanent magnets for greater holding
power.
|
Magnetic ID Holders look
sharp -- enhance your company's professional image. |
|
 The
ID card slides into holder, and two magnets hold it on a shirt or coat
pocket. No clip or pin needed - so there's no damage to fabrics.
|
Shielded
Magnet Information
All of our Magnetic Badge Holders are
available with shielded magnets which are truly shielded. Truly shielded
means they won't erase even the cheaper low energy magnetic stripes that
are used on credit cards. Magnetic stripes on today's ID cards are
almost always of the high energy variety, which doesn't require shielded
magnets. In fact, shielded magnets are only necessary for low energy
magnetic stripes. High energy, bar code, Wiegand, and proximity
cards work properly with our standard Magnetic Badge Holders.
Westinghouse proximity cards work properly with our standard, unshielded
magnets, and should not be used with shielded magnets. |
Imprint
Information
Your company logo can be hot stamped on the
front of items 501-NR, 501-NX, 501-LR, or 501-TX or
on the back flap of any of the holders.
Imprint colors available:
- gold
- white
- black
- electric blue
- royal blue
- red
- silver
- (if no color is specified, imprint will be
gold).
|
|
You supply camera-ready artwork (good quality,
black and white artwork which can be photographed, as is to make the printing
plate). If camera-ready artwork is not supplied, there is a one-time artwork
charge.
Vertical
Format
| Stock
# |
Outside
Dimensions
(w x h) |
Max.
Insert Size (w x h) |
| 501-N |
2
5/8" x 3 3/4" |
2
3/8" x 3 3/8" |
| 501-NR |
2
5/8" x 4 1/2" |
2
3/8" x 3 3/8" |
| 501-NX |
2
5/8" x 4 13/16" |
2
3/8" x 3 3/8" |
| 501-DBL |
2
15/16" x 3 3/4" |
2
5/8" x 3 3/8" |
| 501* |
3
1/16" x 4 3/16" |
2
3/4" x 3 7/8" |
| 501-L |
3
1/16" x 4 3/16" |
2
3/4" x 3 7/8" |
| ORDER
FORM |
|
Horizontal
Format
| Stock
# |
Outside
Dimensions
(w
x h)
|
Max.
Insert Size
(w x h) |
| 501-T |
3
11/16" x 2 13/16" |
3
3/8" x 2 3/8" |
| 501-TX |
3
11/16" x 3 11/16" |
3
3/8" x 2 3/8" |
| 501-T1 |
3
7/8" x 2 13/16" |
3
5/8" x 2 3/8" |
| 501-GT |
4
3/16" x 3 1/8" |
3
7/8" x 2 5/8" |
|
* Same
as 501-L except for shorter pocket flap |
|
**
Shielded magnets are ordered by adding the letter "S" to
above |
|
Items 501, 501-L,
501-DBL have prepunched holes in the pocket flap for insertion of
pin-on badges. |
| ORDER
FORM |
|
Please call toll free at 1-800-899-0963
or fill out this form to inquire
about any of our products.
Copyright
| © 1997 Ban-Koe Systems, Inc. All rights reserved.
Products | Badge Accessories
